CarbonDryJapan

 

CARBONDRY PROTEC / HYBIRD FORMULA

CarbonDry PROTEC is unique concept of which has originality and added-value.
On the surface of Aluminum, Stainless, Magnesium or any other material will be covered CFRP (Carbon Fiber Reinforced Plastic) with vacuum and thermocompression by our original hybrid oven. PROTEC means Protection by CFRP has high strength plus Technique by enhanced its design, so those 2 words hybrids to PROTEC.
CFRP will be covered on the any products so that molding is not needed also one by one request will be acceptable. We can make Only one for you.

EXAMPLES
TYPE-R
TYPE-S
     

 
CARBONDRY DESIGN STUDIO
NCR MILLONA AMG CLK DTM FERRARI F40 NISSAN GT-R NISSAN R35 GT-R PORSCHE 997 TARGA 4S
REINFORCED STRENGTH OF MATERIAL

CarbonDry covers on any material will be stronger than its material strength so that PROTEC will contribute lasting material practicality. Even it will be possible to be lightened its material. Protection advantage will be reduced damages and corrosion.
(Notice; It won’t work enough as expected in case of depending on layering, distinct shape, covering position and any other cause.)

1/5 Aluminum plate
2/6 Aluminum plate + Protec single layered
3/7 Aluminum plate + Protec double layered
4/8 Aluminum plate + Protec triple layered
Strength Testing (JIS K7171) / practiced by Aichi Industrial Technology Institute
Distance of fulcrum point ; 80mm, Testing speed ; 2mm/min,
Temperature ; 23℃, Humidity ; 50%
No. Material Max load Remarks
1 Aluminum plate 60kgf broken 60kg
2 Protec single layered 86kgf strength increasing 43%
3 Protec double layered 180kgf strength increasing 300%
4 Protec triple layered 296kgf strength increasing 493%
※Result may vary because of conditions.

protec_img02

REINFORCED DESIGN

PROTEC helps changing design. Extending a range of design for originality. Full section or portion whatever you want will be PROTEC as much as we can. You don’t have to worry about increasing its weight. Because it will be increased the weight just very few.

Weight Comparison finish Weight
Aluminum Wheel (10inches Motorcycle) Aluminum 1.680g
Black painted 1750g
PROTEC 1.760g
Aluminum Wheel (NISSAN GT-R) Front Normal 11.8kg
Front PROTEC 12.1kg
Rear Normal 12.5kg
Rear PROTEC 12.8kg
KTM RC8 Frame Normal 7.9kg
PROTEC 8.1kg
KTM RC8 Swing Arm Normal 5.4kg
PROTEC 5.7kg
SUZUKI HAYABUSA Front Normal 4.5kg
PROTEC 4.8kg
Fear Normal 5.6kg
PROTEC 5.9kg
KAWASAKI ZZR1400 (GaleSpeed Mugnesium) Front 2.2kg
PROTEC 2.4kg
Rear 3.9kg
PROTEC 4.1kg
KAWASAKI ZEPHYR 1100 FUEL TANK Normal 4.2kg
PROTEC 4.3kg
PROCEEDING

1. Planning
Please let us know what kind of material you would like to be PROTEC.
Mail ; [email protected] Fax ; +81 (0)52 806 5683

yajirushi

2. Please send us your materials.
Sending Address ; CarbonDry JAPAN
4-29 Hirako Asada
Nissin Aichi 470-0124 JAPAN
Tel; 052-807-3336
Caution * Please dismount detachable parts which won’t be PROTEC before sending.
Ex ; Wheels( Discs, Air Valves, Oil seals, Bearings, Balance weight)

yajirushi

3. Operation Time
Generally it will be taken approx 2 weeks after received the materials. But it may be changeable caused by design, complication of material, size and backorder volume.

yajirushi

4. Shipping Out
After completed inspection, we ship out to you your material with PROTEC.

Caution
* Some materials can not be PROTEC.
* Some in case, size or design or any cause can not be PROTEC.
* PROTEC is all hand made technique so that final finish might be slightly different.
* After being PROTEC, it can not be taken back previous condition.
* Please specify if materials have directions. Carbon weaving if necessary.

COLOR OPTION

Finish color is selectable.

Color Image Sample
Gloss Smoke Gloss Smoke is our standard color. Deeply clear
Smoke Red Deeply smoky red
Smoke Green Deeply smoky green
Smoke Yellow Deeply smoky yellow
Smoke Blue Deeply smoky blue
Mat Appears real DRY carbon

※Mat finish is delicate. We recommend show models or display purpose only.
●combination colors will be acceptable.
●Showed sample colors are just for reference. Those will be different from actual colors.

PRICING
PRICING ( TAX not included )
MOTORYCLE WHEEL / FRONT 70,000JPY
WHEEL / REAR 75,000JPY
MAIN FRAME 210,000JPY
SUB FRAME 80,000JPY
SWING ARM 80,000JPY
FUEL TANK 80,000JPY
FORK BRACKET 28,000JPY
AUTOMOBILE WHEEL 80,000JPY

※Those price are basic rate. It may vary according to size, design, finish or any other reason. Please contact us in detail.